Autosave B02 Urinal Flushing Control with integral PIR Sensor and Remote Solenoid Valve for concealed cisterns eg those fitted behind panelwork and also for installations where the cistern is situated at a distance from the urinal.
What does it do? The Autosave B02 urinal flushing control, 6v DC (battery operated), is ideal for installations where a 230v AC supply is not readily available. The Autosave B02 urinal flushing control saves water by flushing urinals only after use. A built-in passive infrared PIR sensor detects persons in the toilet area and initiates a cistern fill and flush cycle a preset time later. A pre-wired remote solenoid valve allows for flexible siting.
A simple pushbutton setup procedure sets the cistern fill time and a programmable switch enables the installer to choose the flushing frequency and also to set a 12 or 24 hour hygiene flush interval for periods when the building is unoccupied eg at weekends or holiday periods.
Due to it’s ease of installation, the Autosave B02 urinal flushing control has now become our most popular automatic flush control and is used extensively by local Councils and washroom hygiene companies throughout the UK. Featuring a 3 year average battery life (batteries provided) and payback period of well within 1 year.
PRODUCT CODE: Autosave-B02
PRODUCT CODE: Autosave-B02-LP (optional low pressure valve)
Detection: By built-in passive infrared sensor, range approx. 4m, coverage 100° from perp.
Solenoid valve: brass latching, 15 mm compression fittings, 2mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low pressure valve for tank fed installations)
Alternative valve specifications: contact sales department
Batteries: 4x Duracell AA cells (supplied) – average life 3 years. No need to reset when changing batteries
Low Battery Warning: Led flashes to indicate low battery status. Valve closes (fail safe) 2 weeks following initial warning
Cistern fill time: 1 to 34 minutes – set by simple pushbutton routine
Flush Program options: flush delay (time from detection to actual flush) 5 – 35 mins in 5 min increments, hygiene flush 12 or 24 Hour
Test function: By Magi-test device, provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time
Enclosure: Size 135 x 75 x 75mm (exc. valve) in white RAL 9010
DownloadsAutosave B02 urinal flushing control - Product Sheet
- 6 - 12 month typical payback period
- Save up to 80% on metered water bills
- Guaranteed for 3 years
- ECA listed
- WRAS approved
- Remote solenoid valve comes complete with cable and DIN connector
- Simple one button setup procedure
- Programmable flush delay and 12 or 24hr hygiene flush
- Magi-Test wand provides functional check for the site manager or janitor
- Optional counter gives instant check on number of flushes enabling savings to be readily calculated
- Suitable for LH or RH water inlet
- Fitting kit includes 4 alkaline batteries, isolating valve, fixing screws and installation instructions
- Manufactured in the UK