The WLDS-10 & WLDS-20 mk3 water leak detection systems monitor the flow of water into a building and sound an alarm and / or shut off the supply should the flow rate exceed preset parameters.
It activates when the flow exceeds the pre-set maximum for the pre-set period of time and can identify different flow and therefore leakage rates, in accordance with BREEAM Wat 3. These parameters can be adjusted by the user to allow for different conditions.
IMPORTANT: in order that meaningful parameters are entered, a full water audit should be carried out in order to establish water consumption trends over a period of time.
WLDS-10 & WLDS-20 Mk3 WATER LEAK DETECTION SYSTEMS
Designed to detect major leaks and help prevent flood damage caused by leaking pipes and fittings or by vandalism.
The WLDS-10 Mk3 water leak detection panel is connected to a pulse water meter installed at the site boundary or main intake point of the building and hence monitors the consumption of water. An audible/visual alarm output is activated when a continuous flow of water passes through the water meter at a flow rate above a preset maximum for a preset period of time.
A normally open free contact is provided for connection to a BMS (Building Management System) or to activate a local sounder/beacon type alarm.
A normally closed free contact is also provided to shut off the water supply via a solenoid shut off valve if required.
The WLDS-20 Mk3 is for installations where a pulse water meter is installed at the site boundary and at the main intake point of the building and in addition can detect a loss of water between the site boundary and the main intake point.
WATER METERS: Click here to see our range of water meters
SOLENOID VALVES: Click here to see our range of valves
FOR SPECIAL APPLICATIONS: please contact our sales department
Specifications:Power requirements: Universal input 100-260v AC 50/60Hz 1.5A max
Pulse Meter Input: 24v DC 5mA maximum for reed switch type pulse meter, programmable for 1, 5, 10 or 100 litres per pulse
PSU Output: 24v DC @ 1.1A for powering alarm or solenoid valves
Alarm Output: Normally open free relay contact rated at 5A resistive load 250v AC / 30v DC
Valve Output: Free relay contact rated at 5A resistive load 250v AC / 30v DC, programmable as Normally open of Normally Closed with timed service function Additional outputs: two alarm contacts are available
External HF/LF input: overrides internal clock
External alarm input: enable ancillary equipment such as tape sensing to be interfaced to the WLDS-10/20 mk3 panels
LCD display: 2x 16 ASCII character with LED backlight
Keypad: with tactile feedback 0-9 numeric keys plus navigation keys for parameter setting and monitoring
Parameters: Litres input range 1 – 32,767, time input range 1 minute – 45 hours, number of High Alerts to alarm: 1-99
Real Time clock: displaying day and time (24Hr format) with automatic GMT/BST changeover. Battery backed (10 year life).
Connections: via DIN rail terminals, maximum conductor size 4mm², cable entry via stuffing glands in gland plate
Enclosure: IP65, steel wall mounting overall dimensions 300 x 300 x 150mm (W x H x D) RAL7035 powder coated
Overall weight: Approximately 6Kg
- Easy to navigate user interface
- Accepts inputs from 1, 5, 10 or 100 LPP reed switch type pulse meters
- Main (M1) & Sub (M2) pulse meters can have different K factors
- 7 day clock enables different periods of high flow to be programmed
- Peak flow capture enables easy setting of accurate parameters
- Displays total throughput in litres - useful for parameter setting and Water Audits
- Output contact for BMS or optional SB-100 sounder/beacon alarm
- Output for 24v DC N. Closed or N. Open solenoid valve with timed service function
- Manual override (protection off) function with adjustable timeout period
- Alarm test function
- Tough steel wall mounting enclosure to IP65 protection, optional wall mounting brackets WMB-100
- Universal 100-240v 50/60Hz input for Worldwide use
- Other features and options available upon request
- Manufactured in the UK