|
 6v DC Battery Operated 15mm Urinal Flush Control with integral PIR Sensor - for exposed cisterns eg those fitted above urinal bowls. This is our most popular battery operated control and is ideal for installations where a 240v supply is not readily available.
Features
- 6 - 12 month typical payback period
- Save up to 80% on metered water bills
- Guaranteed for 3 years
- ECA listed
- WRAS approved
- Integral solenoid valve and PIR sensor
- Simple one button setup procedure
- Programmable flush delay and 12 or 24hr hygiene flush
- New Magi-test operational check for the site manager or janitor
- Optional counter gives instant check on number of flushes enabling savings to be readily calculated
- Suitable for LH or RH water inlet
- Fitting kit includes Duracell batteries, isolating valve, fixing screws and installation instructions
 Description
The Autosave B01 flushing control saves water by flushing urinals only after use. A built-in infrared PIR sensor detects persons in the toilet area and initiates a cistern fill and flush cycle a preset time later.
A simple pushbutton setup procedure sets the cistern fill time and a programmable switch enables the installer to choose the flushing frequency and also to set a hygiene flush interval for periods when the building is unoccupied.
PRODUCT CODE: Autosave-B01
PRODUCT CODE: Autosave-B01-LP (optional low pressure valve)
Specification
Detection: By built-in passive infrared sensor, range approx. 4m, coverage 100° from perp.
Solenoid valve: brass latching, 15 mm compression fittings, 2mm orifice, pressure range 0 - 12 Bar with mesh filter (optional low pressure valve for tank fed installations)
Alternative valve specifications: contact sales department
Batteries: 4x Duracell AA cells (supplied) - average life 3 - 4 years. No need to reset when changing batteries
Low Battery Warning: Led flashes to indicate low battery status. Valve closes (fail safe) 2 weeks following initial warning
Cistern fill time: 1 to 34 minutes - set by simple pushbutton routine
Flush Program options: flush delay (time from detection to actual flush) 5 - 35 mins in 5 min increments, hygiene flush 12 or 24 Hour
Test function: By Magi-test device, provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time
Enclosure: Size 135 x 75 x 75mm (exc. valve) in white RAL 9010
|
