|
 240v AC Mains Operated 15mm Urinal Flush Control with integral PIR Sensor - the complete 'fit & forget' solution for exposed cisterns eg those fitted above urinal bowls. This is our most popular control and has an outstanding record for reliability and long service.
Features
- 6 - 12 month typical payback period
- Save up to 80% on metered water bills
- Guaranteed for 3 years
- ECA listed
- WRAS approved
- Integral solenoid valve and PIR sensor
- Simple one button setup procedure
- Programmable flush delay and 12 or 24hr hygiene flush
- New Magi-test janitor test function
- Optional counter gives instant check on number of flushes enabling savings to be readily calculated
- Suitable for LH or RH water inlet
- Fail-safe valve - closes if power is removed
- No need to reset after power cut
- Locking screws provided to prevent unauthorised opening
- Fitting kit includes isolating valve, cable gland, locking screws, fixing screws and installation instructions
Description
The Autosave M01 flushing control saves water by flushing urinals only after use. A built-in infrared PIR sensor detects persons in the toilet area and initiates a cistern fill and flush cycle a preset time later.
A simple pushbutton setup procedure sets the cistern fill time and a programmable switch enables the installer to choose the flushing frequency and also to set a hygiene flush interval for periods when the building is unoccupied.
PRODUCT CODE: Autosave M01
PRODUCT CODE: Autosave M01-LP (optional low pressure valve)
Specification
Detection: By built-in passive infrared sensor, range approx. 4m, coverage 100° from perp.
Solenoid valve: brass normally closed, 15 mm compression fittings, 2.4mm orifice, pressure range 0 - 12 Bar with mesh filter (optional low pressure valve for tank fed installations)
Alternative valve specifications: contact sales department
Cistern fill time: 1 to 34 minutes - set by simple pushbutton routine
Flush Program options: flush delay (time from detection to actual flush) 5 - 35 mins in 5 min increments, hygiene flush 12 or 24 Hour
Test function: By Magi-test device, provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time
Power: 240v ac 50Hz 10VA maximum, cable entry through stuffing gland on RHS of enclosure
Enclosure: Size 135 x 75 x 75mm (exc. valve) in white RAL 9010
|
