Our Autosave urinal flushing controls are preferred by many contractors for their ease of installation and reliability. Find out more about Autosave urinal flushing controls
Autosave infrared urinal flushing controls are set up at commissioning to fill the cistern from empty to the automatic flushing level in one fill. The solenoid valve is ‘taught’ how long to open for by a simple push button routine. This time is then stored in memory.
If the automatic flushing cistern is not empty when commissioning, simply follow steps 1, 2 & 3 on the installation instructions setting-up guide. When the cistern starts to flush simply abort the setting up by disconnecting the battery pack (for Autosave B01 or B02) or turn off the mains electricity (for Autosave M01 or M02). The cistern will then empty.
Repeat steps 1 to 4 on the the installation instructions setting-up guide.