Pulsed Water Meters - Cold & Hot Water - Flanged & Screwed https://www.watersavers.co.uk/product-category/pulsed-water-meters-category/ Experts in water and effluent water disinfection Wed, 30 Apr 2025 14:51:42 +0000 en-GB hourly 1 https://www.watersavers.co.uk/wp-content/uploads/2021/08/watersavers-icon.png Pulsed Water Meters - Cold & Hot Water - Flanged & Screwed https://www.watersavers.co.uk/product-category/pulsed-water-meters-category/ 32 32 Pulsed Water Meters – Hot Water https://www.watersavers.co.uk/shop/watersavers/pulsed-water-meters-hot-water/?utm_source=rss&utm_medium=rss&utm_campaign=pulsed-water-meters-hot-water Fri, 28 Jan 2022 10:20:22 +0000 https://www.watersavers.co.uk/?post_type=product&p=27542 Watersavers offers a range of multi-jet-based water meters used for monitoring and measuring water usage. The screwed hot water meters are available for the sizes from 1/2″ BSP to 2″ BSP (15mm to 50mm) - other diameters are available on request.

These pulsed water meters feature clear, easily read displays, free from condensation.

These models are for hot water and have screwed connections.

WRAS approved.

The post Pulsed Water Meters – Hot Water appeared first on Watersavers.

]]>

Pulsed Water Meters – Pulse Output for Hot Water Flow Monitoring

Choosing Pulsed Water Meters

For hot water (up to 90°C) applications, the size of water meter is usually determined by the gauge of pipe into which the meter will be fixed.

Please note that larger water meters have a large flowrate factor (in m³/h) and are less sensitive to low flow rates. If in doubt see the datasheet which provides technical information including flowrates, physical sizes and weights or call a Watersavers’ expert on 01603 720999 or email sales@watersavers.co.uk we’d be delighted to help.

WMP pulse water meters are fitted with a reed switch contact to provide one contact closure per fixed volume of water flowing through, whilst allowing the dial to be read. The contact output may be connected to a remote digital meter, leak detection panel or other electrical or electronic system.

Water Meter Monitoring Systems

Watersavers provides bespoke control panels for leak detection, flood prevention, alarm and other applications. Please call an expert on 01603 720999 or email sales@watersavers.co.uk

Pulsed Water Meters

Water meters are available with a pulsed output which can be used for remote monitoring making them suitable for installations applying for BREEAM Wat 02 and Wat 03.

Watersavers supplies a standard range of pulse water meters in sizes from 1/2” up to 4” BSP. These meters are WRAS approved and have a pulse output enabling water flow to be monitored, logged or controlled – especially for BREEAM credits.

These meters give a pulse output (usually from a magnetic reed switch) for a fixed volume of water flowing through them.  The K factor is the number of litres per pulse output. On smaller meters from 1/2” to 1 1/4” BSP, the factor is usually 1 litre per pulse. This increases to 10 litres per pulse and 100 litres per pulse for larger meters.

Our WLDS-10mk3 and WLDS-20 mk3 leak detection panels monitor pulses from pulse water meters and raise an alarm in the event of the water flow rate exceeding preset parameters.

Hot Water Pulsed Water Meter Product Codes

Water Meter Product Codes Nominal Size Maximum Flow Rate Minimum Flow Rate Litres/Pulse Options Weight
Hot (up to 90 ° C) British Standard Pipe (BSP) m3/h l/h WMP models only kg
WMP15H-K=1 ½” 2.5 30 1, 10, 100 2
WMP20H-K=1 ¾” 4 50 1, 10, 100 2
WMP25H-K=1 1” 6.3 70 1, 10, 100 2.8
WMP32H-K=1 1¼” 10 120 1, 10, 100 2.8
WMP40H-K=10 1½” 15 300 10, 100, 1k 4.65
WMP50H-K=10 2” 25 500 10, 100, 1k 10.3

 

Larger sizes are available on request.

Features

  • Suitable for installations applying for BREEAM Wat 02 & Wat 03 credits
  • Ideal for monitoring water usage and BMS applications
  • Only one moving part for minimum wear and maximum reliability – even in hard water areas
  • Visual indicator sensitive to the smallest flow – ideal for leak detection
  • Optional electrical ‘pulse’ output usually 1 per litre
  • Sealed display capsule – guaranteed against condensation

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Pulsed Water Meters – Hot Water appeared first on Watersavers.

]]> Pulsed Water Meters – Flanged https://www.watersavers.co.uk/shop/watersavers/pulsed-water-meters-flanged/?utm_source=rss&utm_medium=rss&utm_campaign=pulsed-water-meters-flanged Fri, 28 Jan 2022 09:10:38 +0000 https://www.watersavers.co.uk/?post_type=product&p=27534 Watersavers offers a range of multi-jet-based water meters used for monitoring and measuring water usage. The flanged cold water meters are available for the larger sizes from 2″ BSP to 4″ BSP (50mm to 100mm) - other diameters are available on request.

These pulsed water meters feature clear, easily read displays, free from condensation.

These models are for cold water and have flanged connections.

WRAS approved.

The post Pulsed Water Meters – Flanged appeared first on Watersavers.

]]>

Pulsed Water Meters – Flanged DN Connections

Choosing Pulsed Water Meters

For general cold-water (30°C) applications, the size of water meter is usually determined by the gauge of pipe into which the meter will be fixed.

Please note that larger water meters have a large flowrate factor (in m³/h) and are less sensitive to low flow rates. If in doubt see the datasheet which provides technical information including flowrates, physical sizes and weights or call a Watersavers’ expert on 01603 720999 or email sales@watersavers.co.uk we’d be delighted to help.

WMP pulse water meters are fitted with a reed switch contact to provide one contact closure per fixed volume of water flowing through, whilst allowing the dial to be read. The contact output may be connected to a remote digital meter, leak detection panel or other electrical or electronic system.

For smaller diameter connections see our screwed connection pulse water meters.

Water Meter Monitoring Systems

Watersavers provides bespoke control panels for leak detection, flood prevention, alarm and other applications. Please call an expert on 01603 720999 or email sales@watersavers.co.uk

Pulsed Water Meters

Water meters are available with a pulsed output which can be used for remote monitoring making them suitable for installations applying for BREEAM Wat 02 and Wat 03.

Watersavers supplies a standard range of pulse water meters in sizes from 1/2” up to 4” BSP. These meters are WRAS approved and have a pulse output enabling water flow to be monitored, logged or controlled – especially for BREEAM credits.

These meters give a pulse output (usually from a magnetic reed switch) for a fixed volume of water flowing through them.  The K factor is the number of litres per pulse output. On larger meters from 2” to 4” BSP, the factor is usually 100 litres per pulse. On smaller screwed meters it is typically 1 or 10 litres per pulse.

Our WLDS-10mk3 and WLDS-20 mk3 leak detection panels monitor pulses from pulse water meters and raise an alarm in the event of the water flow rate exceeding preset parameters.

Flanged Pulsed Water Meter Product Codes

 

Flanged Water Meter Product Codes Nominal Size Nominal Size Maximum Flow Rate Minimum Flow Rate Litres/Pulse Options Weight
Cold (30 ° C) British Standard Pipe (BSP) mm m3/h m3/h WMP models only kg
WMPF50-K=10 2” 50 40 0.5 100, 1k 12
WMPF65-K=10 21½” 65 78.7 0.787 100, 1k 13
WMPF80-K=10 3” 80 78.7 0.787 100, 1k 16
WMPF100-K=10 4” 100 125 1.25 100, 1k 18

 

Other sizes are available on request. For smaller diameter connections see our screwed connection pulse water meters.

Features

  • Suitable for installations applying for BREEAM Wat 02 & Wat 03 credits
  • Ideal for monitoring water usage and BMS applications
  • Only one moving part for minimum wear and maximum reliability – even in hard water areas
  • Visual indicator sensitive to the smallest flow – ideal for leak detection
  • Optional electrical ‘pulse’ output usually 1 pulse per 100 litres for flanged meters
  • Sealed display capsule – guaranteed against condensation

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Pulsed Water Meters – Flanged appeared first on Watersavers.

]]> Pulsed Water Meters – Cold Water https://www.watersavers.co.uk/shop/watersavers/pulsed-water-meters-cold-water/?utm_source=rss&utm_medium=rss&utm_campaign=pulsed-water-meters-cold-water Thu, 27 Jan 2022 15:16:52 +0000 https://www.watersavers.co.uk/?post_type=product&p=27523 Watersavers offers a range of multi-jet-based water meters used for monitoring and measuring water usage. The screwed cold water meters are available in sizes from 1/2″ BSP to 2″ BSP (15mm to 50mm) - larger diameters are available in flanged configuration.

These pulsed water meters feature clear, easily read displays, free from condensation. Larger sizes are available on request.

These models are for cold water and have screwed connections.

WRAS approved.

The post Pulsed Water Meters – Cold Water appeared first on Watersavers.

]]>

Pulsed Water Meters – Pulse Output for Cold Water Flow Monitoring

Choosing Pulsed Water Meters

For general cold-water (30°C) or hot water (90°C) applications, the size of water meter is usually determined by the gauge of pipe into which the meter will be fixed.

Please note that larger water meters have a large flowrate factor (in m³/h) and are less sensitive to low flow rates. If in doubt see the datasheet which provides technical information including flowrates, physical sizes and weights or call a Watersavers’ expert on 01603 720999 or email sales@watersavers.co.uk we’d be delighted to help.

WMP pulse water meters are fitted with a reed switch contact to provide one contact closure per fixed volume of water flowing through, whilst allowing the dial to be read. The contact output may be connected to a remote digital meter, leak detection panel or other electrical or electronic system.

Water Meter Monitoring Systems

Watersavers provides bespoke control panels for leak detection, flood prevention, alarm and other applications. Please call an expert on 01603 720999 or email sales@watersavers.co.uk

Pulsed Water Meters

Water meters are available with a pulsed output which can be used for remote monitoring making them suitable for installations applying for BREEAM Wat 02 and Wat 03.

Watersavers supplies a standard range of pulse water meters in sizes from 1/2” up to 4” BSP. These meters are WRAS approved and have a pulse output enabling water flow to be monitored, logged or controlled – especially for BREEAM credits.

These meters give a pulse output (usually from a magnetic reed switch) for a fixed volume of water flowing through them.  The K factor is the number of litres per pulse output. On smaller meters from 1/2” to 1 1/4” BSP, the factor is usually 1 litre per pulse. This increases to 10 litres per pulse and 100 litres per pulse for larger meters.

Our WLDS-10mk3 and WLDS-20 mk3 leak detection panels monitor pulses from pulse water meters and raise an alarm in the event of the water flow rate exceeding preset parameters.

Pulsed Water Meter Product Codes

Water Meter Product Codes Nominal Size Maximum Flow Rate Minimum Flow Rate Litres/Pulse Options Weight
Cold (30 ° C) Hot (90 ° C) British Standard Pipe (BSP) m3/h l/h WMP models only kg
WMP15-K=1 WMP15H-K=1 ½” 2.5 30 1, 10, 100 2
WMP20-K=1 WMP20H-K=1 ¾” 4 50 1, 10, 100 2
WMP25-K=1 WMP25H-K=1 1” 6.3 70 1, 10, 100 2.8
WMP32-K=1 WMP32H-K=1 1¼” 10 120 1, 10, 100 2.8
WMP40-K=10 WMP40H-K=10 1½” 15 300 10, 100, 1k 4.65
WMP50-K=10 WMP50H-K=10 2” 25 500 10, 100, 1k 10.3

 

Larger sizes are available on request.

Features

  • Suitable for installations applying for BREEAM Wat 02 & Wat 03 credits
  • Ideal for monitoring water usage and BMS applications
  • Only one moving part for minimum wear and maximum reliability – even in hard water areas
  • Visual indicator sensitive to the smallest flow – ideal for leak detection
  • Optional electrical ‘pulse’ output usually 1 per litre
  • Sealed display capsule – guaranteed against condensation

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Pulsed Water Meters – Cold Water appeared first on Watersavers.

]]>