Solenoid Valves - Danfoss - Shut off Water Valves https://www.watersavers.co.uk/product-category/solenoid-valves/ Experts in water and effluent water disinfection Wed, 30 Sep 2026 20:38:08 +0000 en-GB hourly 1 https://www.watersavers.co.uk/wp-content/uploads/2021/08/watersavers-icon.png Solenoid Valves - Danfoss - Shut off Water Valves https://www.watersavers.co.uk/product-category/solenoid-valves/ 32 32 Danfoss Solenoid Shut Off Water Valves https://www.watersavers.co.uk/shop/watersavers/danfoss-solenoid-shut-off-water-valves/?utm_source=rss&utm_medium=rss&utm_campaign=danfoss-solenoid-shut-off-water-valves Thu, 09 Nov 2023 10:04:54 +0000 https://www.watersavers.co.uk/?post_type=product&p=28494

(½” – 2″)

Solenoid shut off valves are included in a run of water pipe to allow electric switching on and off of water flow through the valve.  This can be coupled with many of our products, including our Major Water Leak Detection Systems

Watersavers Danfoss range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves, can be controlled by an on/off switch, a time switch or by a PIR sensor switch for BREEAM credits

The post Danfoss Solenoid Shut Off Water Valves appeared first on Watersavers.

]]>

Danfoss Solenoid Valves – Indirect Servo-Operated 2/2 Way

These Danfoss 230 VAC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. The valves are compact, designed especially for use within a limited space. As default our valves are Normally Closed – which means that they are closed when de-energised (fail-safe) and open when energised.

Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.

Specification

  • 2/2 NC Normally Closed (fail safe) operation
  • Available in sizes from ½” to 2″ BSP female thread
  • Minimum pressure 0.3 bar
  • Maximum pressure 10 bar working (15 bar max)
  • Maximum temperature 90°C
  • WRAS approved
  • 230 V coil – other AC & DC coil voltage options available
  • Standard equipped with clip on coil, for dry and humid environments
  • Enclosure: IP65 rated

Product Codes

  • ½” DFV-15
  • ¾” DFV-22
  • 1″ DFV-28
  • 1 ¼” DFV-35
  • 1 ½” DFV-42
  • 2″ DFV-50

Please note – standard coil voltage is 230 VAC.

Features

  • 2/2 NC Normally Closed (fail safe) operation
  • Sizes from 1/2″ to 2″ BSP female thread
  • Minimum pressure 0.3 bar.
  • Maximum pressure 10 bar working (15 bar max)
  • Maximum temperature 90°C
  • 230 VAC coil 8W – other AC & DC coil voltage options available
  • WRAS approved
  • Equipped with clip on coil for dry and humid environments
  • 12-month manufacturers’ warranty
  • Enclosure: IP65 rated

For larger valve sizes and low-pressure options please contact us on 01603 720999 or email sales@watersavers.co.uk

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Danfoss Solenoid Shut Off Water Valves appeared first on Watersavers.

]]> Solenoid Shut Off Water Valves (Electric Water Valve) https://www.watersavers.co.uk/shop/watersavers/solenoid-shut-off-valves/?utm_source=rss&utm_medium=rss&utm_campaign=solenoid-shut-off-valves Wed, 01 Sep 2021 11:07:03 +0000 http://www.watersavers.co.uk/?post_type=product&p=26942

(½” – 2″)

Solenoid shut off valves (electric shut off valves) are included in a run of water pipe to allow electric switching on and off of water flow through the valve.  This can be coupled with many of our products, including our Major Water Leak Detection Systems

The post Solenoid Shut Off Water Valves (Electric Water Valve) appeared first on Watersavers.

]]>

Solenoid Shut Off Water Valves (Electric Water Valve)

These 230/240v AC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. Our standard valves are Normally Closed – which means that they are closed when de-energised (fail safe) and open when energised.

Watersavers Smart Valve Monitor (SVM) range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves, controlled by an on/off switch, a time switch or by a PIR sensor switch for BREEAM credits.

Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.

Specification

  • 2/2 NC Normally Closed (fail safe) operation
  • Available in sizes from ½” to 2″ BSP female thread
  • Minimum pressure 0.35 Bar.  Maximum pressure 13 Bar (½” – 1″) 10 Bar (1¼” – 2″)
  • Maximum temperature 90°C
  • WRAS approved
  • 230/240v coil – other AC & DC coil voltage options available

Product Codes

  • ½” SVM-15 | 1¼” SVM-35
  • ¾” SVM-22 | 1½” SVM-42
  • 1″ SVM-28 | 2″ SVM-50

Please note – standard coil voltage is 230/240v AC.

Add alternative coil voltage to product code if required (e.g. SVM-22-24VAC or SVM-15-12VDC).

Features

  • 2/2 NC Normally Closed (fail safe) operation
  • Sizes from 1/2″ to 2″ BSP female thread
  • Minimum pressure 0.35 Bar. Maximum pressure 13 Bar (½” – 1″) 10 Bar (1¼” – 2″)
  • Maximum temperature 90°C
  • 230/240 VAC coil 4W
  • WRAS approved
  • Supplied with DIN connector
  • 12-month manufacturers’ warranty

For larger valve sizes and low-pressure options please contact us on 01603 720999 or email sales@watersavers.co.uk

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Solenoid Shut Off Water Valves (Electric Water Valve) appeared first on Watersavers.

]]>