SVM range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves (230/240v AC). They may be controlled by an on/off switch, a time switch or by a PIR switch for BREEAM credits.
These 230/240v AC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. Our standard valves are Normally Closed – which means that they are closed when de-energised (fail safe) and open when energised.
Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.
2/2 NC Normally Closed (fail safe) operation
Available in sizes from ½” to 2″ BSP female thread
Minimum pressure 0.35 Bar. Maximum pressure 13 Bar (½” – 1″) 10 Bar (1¼” – 2″)
Maximum temperature 90°C
230/240v coil 4W
½” SVM-15 ¾” SVM-22 1″ SVM-28 1¼” SVM-35 1½” SVM-42 2″ SVM-50
Downloads230/240v AC Solenoid Shut off Valves DATASHEET
- 2/2 NC Normally Closed (fail safe) operation
- Sizes from 1/2" to 2" BSP female thread
- Minimum pressure 0.35 Bar. Maximum pressure 13 Bar (½" - 1") 10 Bar (1¼" - 2")
- Maximum temperature 90°C
- 230/240 VAC coil 4W
- WRAS approved
- Supplied with DIN connector
- 12 months manufacturers warranty