DIN solenoid valve connectors – rectangular & square
Call 01603 720999 and order by 3pm for next day delivery
Plastic DIN solenoid valve connectors. Rectangular type are suitable for our 1/2″, 3/4″ and 1″ WRAS approved solenoid valves, the square DIN connectors are suitable for 1.25″ sizes and larger.
WIRING: connect L & N or +ve & -ve wires to terminals 1 & 2. The polarity is not important. Use round 0.75mm cable to connect to the DIN plug and ensure that the cable insulation is securely clamped in place. The third terminal marked with an earth symbol should be connected to earth.
TOO FIDDLY FOR YOU? We can supply the DIN connectors already fitted to lengths of cable saving you valuable time and effort on-site. Please call for details.
Note: the internal part of the connector may be rotated by 180º in order that the cable exits toward or away from the solenoid valve. To remove the internal part once assembled, insert a small screwdriver into the opening on the mating face (see photo top LH corner) and gently prise it out.
PRODUCT CODES: DIN-RECT or DIN-SQUARE. If you are unsure which type to order please call us on 01603 720999