Solenoid Water Shut off Valves – from ½” to 2″ BSP

SVM range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves. They may be controlled by an on/off switch, a time switch or by a PIR sensor switch for BREEAM credits.

These 230/240v AC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. Our standard valves are Normally Closed – which means that they are closed when de-energised (fail safe) and open when energised.

Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.

SPECIFICATION

• 2/2 NC Normally Closed (fail safe) operation
• Available in sizes from ½” to 2″ BSP female thread
• Minimum pressure 0.35 Bar.  Maximum pressure 13 Bar (½” – 1″) 10 Bar (1¼” – 2″)
• Maximum temperature 90°C
• WRAS approved
• 230/240v coil – other AC & DC coil voltage options available

PRODUCT CODES

½” SVM-15 | 1¼” SVM-35
¾” SVM-22 | 1½” SVM-42
1″ SVM-28 | 2″ SVM-50

Note – standard coil voltage is 230/240v AC.
Please add alternative coil voltage to Product Code if required (eg SVM-22-24VAC or SVM-15-12VDC).

For larger valve sizes and low pressure options please contact us.