Urinal Flush Controls - Watersavers https://www.watersavers.co.uk/product-category/urinal-cistern-flush-controls/ Experts in water and effluent water disinfection Tue, 02 Sep 2025 13:39:05 +0000 en-GB hourly 1 https://www.watersavers.co.uk/wp-content/uploads/2021/08/watersavers-icon.png Urinal Flush Controls - Watersavers https://www.watersavers.co.uk/product-category/urinal-cistern-flush-controls/ 32 32 Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-remote-autosave-ufc-remote/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-remote-autosave-ufc-remote Fri, 20 Oct 2023 15:09:38 +0000 https://www.watersavers.co.uk/?post_type=product&p=28472
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Remote
(AUFC-REMOTE)

230v AC mains operated 15mm timed urinal flushing control with PIR sensor – the complete ‘fit & forget’ solution for exposed or concealed cisterns.

The post Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

This kit includes a slave PIR sensor box, separate from the control – allowing you even greater flexibility when it comes to your installation configuration.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-REMOTE urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor (separate box to controls allowing greater flexibility of installation)

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-REMOTE-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 230v ac 50Hz 10VA maximum

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-REMOTE or AUFC-REMOTE-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-REMOTE timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Mains powered – fit & forget solution
  • Fail-safe valve – closes if power is removed or fails
  • No need to reset after power outage
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) appeared first on Watersavers.

]]> Autosave Urinal Flush Control – Battery (Autosave UFC-B) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-battery-autosave-ufc-b/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-battery-autosave-ufc-b Fri, 20 Oct 2023 14:30:10 +0000 https://www.watersavers.co.uk/?post_type=product&p=28461
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Battery

4.5 V battery operated 15mm timed urinal flushing control with PIR sensor – the simplest and most convenient setup for exposed and concealed cistern urinals.

The post Autosave Urinal Flush Control – Battery (Autosave UFC-B) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Battery (Autosave UFC-B)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

The battery version is ideal for areas without readily available mains power supply, making the Autosave UFC-B the simplest configuration to fit to a washroom urinal cistern water supply.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-B urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-B-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 4.5 VDC (3 x AA batteries)

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-B or AUFC-B-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-M timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Battery powered – easy maintenance and easy access
  • Fail-safe valve – closes if power is removed or fails
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Battery (Autosave UFC-B) appeared first on Watersavers.

]]> Autosave Urinal Flush Control – Mains (Autosave UFC-M) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-m/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-m Mon, 09 Oct 2023 07:53:00 +0000 https://www.watersavers.co.uk/?post_type=product&p=28414
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Mains 

230v AC mains operated 15mm timed urinal flushing control with PIR sensor – the complete ‘fit & forget’ solution for exposed or concealed cisterns.

The post Autosave Urinal Flush Control – Mains (Autosave UFC-M) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Mains (Autosave UFC-M)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-M urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-M-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 230v ac 50Hz 10VA maximum

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-M or AUFC-M-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-M timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Mains powered – fit & forget solution
  • Fail-safe valve – closes if power is removed or fails
  • No need to reset after power outage
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Mains (Autosave UFC-M) appeared first on Watersavers.

]]>