Shop | Water-Saving & Leak Detection Products | Watersavers https://www.watersavers.co.uk/product-category/watersavers/ Experts in water and effluent water disinfection Wed, 30 Sep 2026 20:38:08 +0000 en-GB hourly 1 https://www.watersavers.co.uk/wp-content/uploads/2021/08/watersavers-icon.png Shop | Water-Saving & Leak Detection Products | Watersavers https://www.watersavers.co.uk/product-category/watersavers/ 32 32 Danfoss Permanent Magnet – 018F0091 https://www.watersavers.co.uk/shop/watersavers/danfoss-permanent-magnet/?utm_source=rss&utm_medium=rss&utm_campaign=danfoss-permanent-magnet Thu, 07 Nov 2024 08:20:44 +0000 https://www.watersavers.co.uk/?post_type=product&p=29152 Danfoss Permanent Magnet - 018F0091

Accessory for solenoid valve commissioning, manual operation, checking and testing.

The post Danfoss Permanent Magnet – 018F0091 appeared first on Watersavers.

]]>

Danfoss Permanent Magnet – 018F0091

Accessory for solenoid valve commissioning, manual operation, checking and testing.

This product will typically be dispatched within 2-3 working days.

The post Danfoss Permanent Magnet – 018F0091 appeared first on Watersavers.

]]> 15mm Solenoid Valve Operating Magnet https://www.watersavers.co.uk/shop/watersavers/15mm-solenoid-valve-operating-magnet/?utm_source=rss&utm_medium=rss&utm_campaign=15mm-solenoid-valve-operating-magnet Mon, 25 Mar 2024 15:11:51 +0000 https://www.watersavers.co.uk/?post_type=product&p=28698 15mm Solenoid Valve Operating Magnet

The 15mm Solenoid Valve Operating Magnet is a service and commissioning tool for the manual operation of solenoid valves.

The post 15mm Solenoid Valve Operating Magnet appeared first on Watersavers.

]]>

15mm Solenoid Valve Operating Magnet

The 15mm Solenoid Valve Operating Magnet – service and commissioning tool for the manual operation of solenoid valves.

This product will typically be dispatched within 2-3 working days.

The post 15mm Solenoid Valve Operating Magnet appeared first on Watersavers.

]]> Timed Discharge Valve – Mains Powered (TDV-M) https://www.watersavers.co.uk/shop/watersavers/tdv-m-timed-discharge-water-valve/?utm_source=rss&utm_medium=rss&utm_campaign=tdv-m-timed-discharge-water-valve Mon, 08 Jan 2024 09:09:25 +0000 https://www.watersavers.co.uk/?post_type=product&p=28564

The TDV-M timed discharge water valve opens a solenoid valve at fixed intervals to dose a preset volume of water. Developed in collaboration with public health engineers, the TDV-M water valve helps minimise stagnation of water and remoistens seals and gullies.

(SVM-15 1/2″ WRAS Approved Solenoid Valve included)

The post Timed Discharge Valve – Mains Powered (TDV-M) appeared first on Watersavers.

]]>

TDV-M Timed Discharge Valve – Water Supply at Regular Intervals

Additional applications include refreshing dead leg pipes to rarely or unused pipes in unoccupied parts of buildings and to replenish seals in traps, gullies and drains compensating for loss of water due to evaporation.

The TDV-M water valve control is supplied ready wired and is simple to install & setup with clearly marked controls to set the necessary parameters.

If you need to save time on site and can provide us with the settings, we’ll set the on and off times for you. Just let us know.

If you have a specific requirement please contact us on 01603 720999 to discuss, or email sales@watersavers.co.uk.

Specifcation for TDV-M Timed Discharge Water Valve

Dosing Volume / Interval: To meet all needs the on (valve opening time) and the off (interval) is adjustable from 1 to 9 hours.

Solenoid valve: Brass Normally Closed (fail-safe), 1/2″ British Standard Pipe (BSP) female threads, 13.5mm orifice, pressure range 0.35 – 10 Bar, WRAS approved.

Please contact us for alternative valve sizes – call 01603 720999 or email sales@watersavers.co.uk

Timing options: the default sequence: on – off – on – off – on. By breaking or removing the internal yellow wire link, the sequence can be changed to off – on – off – on – off.

Power supply: The TDV-M can be operated from 240VAC (50/60HZ). Please note that the solenoid valve coil must match the supply voltage and vice versa.

Cables: Power and valve cables are supplied to a nominal 2m length. Core size is 0.75mm²

Enclosure: Size 126 x 96 x 41 mm (excluding cable glands) in white RAL 9010.

Product Code: TDV-M-1/2″

Features of the Timed Discharge Water Valve

  • Dosing volume and interval easily adjusted
  • Timing ranges from 1 to 9 hours
  • Fail-safe Normally Closed WRAS solenoid valve
  • 12 – 240VAC/DC (50/60HZ) power options
  • Prewired – easy to install
  • Manufactured in the UK

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers TDV-100
  • Watersavers TDV-6

These legacy products are now all obsolete, however we do still hold some limited spares for older generation timed discharge valves. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

The post Timed Discharge Valve – Mains Powered (TDV-M) appeared first on Watersavers.

]]> Timed Discharge Valve – Battery Powered (TDV-B) https://www.watersavers.co.uk/shop/watersavers/tdv-b-timed-discharge-valve-battery-powered/?utm_source=rss&utm_medium=rss&utm_campaign=tdv-b-timed-discharge-valve-battery-powered Mon, 08 Jan 2024 09:08:32 +0000 https://www.watersavers.co.uk/?post_type=product&p=28563

The TDV-B battery powered timed discharge valve is ideal for regular periodic flushing of pipework to reduce stagnation. Developed in collaboration with public health engineers, the TDV-B water valve helps minimise stagnation of water and remoistens seals and gullies.

The post Timed Discharge Valve – Battery Powered (TDV-B) appeared first on Watersavers.

]]>

TDV-B Timed Discharge Valve (Battery Powered) – Water Supply in Regular Intervals

The unit is battery powered making it ideal for remote sites where mains electricity is unavailable. The control is also suitable for replenishing trap seals due to evaporation.

The TDV-B uses quartz crystal-controlled timekeeping and low power technology supporting an average battery life of up to four years. The control is easy to set up with a wide range of user selectable time intervals including hourly, four times daily, twice daily, daily, every two days and twice weekly.

The volume of water which is discharged is determined by the valve opening time. This can simply be set using the internal pushbutton or (without removing the front cover) using the Magi-Test wand. The control can be configured to discharge any volume, from a fraction of a litre per week to multiple litres per hour covering most applications.

A low battery status warning is provided by the LED which blinks every two seconds.

We recommend a procedure is put in place to change the batteries at least every two to three years.

Specification

lnterval: User set 1 to 90 hours
Discharge (valve opening) time: 1 second to 240 minutes – set by Magi-Test wand or internal push button
Solenoid valve: 1/2″ British Standard Pipe (BSP) male threads nylon latching, 0.2 – 10 BAR pressure range, 11mm orifice, Kv (flow) 28.3 litres/min, WRAS approved, supplied with 2m length cable, can be shortened or extended as required
Batteries: 3x alkaline AA cells (supplied) – average life up to four years, no need to reset when changing
Low Battery Warning: Led blinks every two seconds to indicate low battery status
Magi-Test wand function: enables setting of flushing time plus full functional test including valve, batteries, water supply, flushing time
Enclosure: size 126 x 96 x 41 mm, in white RAL 9010

Product Code: TDV-B-1/2″

Features

  • Interval from hourly to twice weekly
  • Flushing time from 1 second to 240 minutes
  • Magi-Test wand or push button operation
  • Ready wired 1/2″ WRAS nylon valve
  • Up to four years battery life
  • LED low battery status warning
  • Complete with batteries and fitting kit
  • Manufactured in the UK

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers TDV-100
  • Watersavers TDV-6

These legacy products are now all obsolete, however we do still hold some limited spares for older generation timed discharge valves. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

The post Timed Discharge Valve – Battery Powered (TDV-B) appeared first on Watersavers.

]]> Danfoss Solenoid Shut Off Water Valves https://www.watersavers.co.uk/shop/watersavers/danfoss-solenoid-shut-off-water-valves/?utm_source=rss&utm_medium=rss&utm_campaign=danfoss-solenoid-shut-off-water-valves Thu, 09 Nov 2023 10:04:54 +0000 https://www.watersavers.co.uk/?post_type=product&p=28494

(½” – 2″)

Solenoid shut off valves are included in a run of water pipe to allow electric switching on and off of water flow through the valve.  This can be coupled with many of our products, including our Major Water Leak Detection Systems

Watersavers Danfoss range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves, can be controlled by an on/off switch, a time switch or by a PIR sensor switch for BREEAM credits

The post Danfoss Solenoid Shut Off Water Valves appeared first on Watersavers.

]]>

Danfoss Solenoid Valves – Indirect Servo-Operated 2/2 Way

These Danfoss 230 VAC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. The valves are compact, designed especially for use within a limited space. As default our valves are Normally Closed – which means that they are closed when de-energised (fail-safe) and open when energised.

Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.

Specification

  • 2/2 NC Normally Closed (fail safe) operation
  • Available in sizes from ½” to 2″ BSP female thread
  • Minimum pressure 0.3 bar
  • Maximum pressure 10 bar working (15 bar max)
  • Maximum temperature 90°C
  • WRAS approved
  • 230 V coil – other AC & DC coil voltage options available
  • Standard equipped with clip on coil, for dry and humid environments
  • Enclosure: IP65 rated

Product Codes

  • ½” DFV-15
  • ¾” DFV-22
  • 1″ DFV-28
  • 1 ¼” DFV-35
  • 1 ½” DFV-42
  • 2″ DFV-50

Please note – standard coil voltage is 230 VAC.

Features

  • 2/2 NC Normally Closed (fail safe) operation
  • Sizes from 1/2″ to 2″ BSP female thread
  • Minimum pressure 0.3 bar.
  • Maximum pressure 10 bar working (15 bar max)
  • Maximum temperature 90°C
  • 230 VAC coil 8W – other AC & DC coil voltage options available
  • WRAS approved
  • Equipped with clip on coil for dry and humid environments
  • 12-month manufacturers’ warranty
  • Enclosure: IP65 rated

For larger valve sizes and low-pressure options please contact us on 01603 720999 or email sales@watersavers.co.uk

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

The post Danfoss Solenoid Shut Off Water Valves appeared first on Watersavers.

]]> Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-remote-autosave-ufc-remote/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-remote-autosave-ufc-remote Fri, 20 Oct 2023 15:09:38 +0000 https://www.watersavers.co.uk/?post_type=product&p=28472
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Remote
(AUFC-REMOTE)

230v AC mains operated 15mm timed urinal flushing control with PIR sensor – the complete ‘fit & forget’ solution for exposed or concealed cisterns.

The post Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

This kit includes a slave PIR sensor box, separate from the control – allowing you even greater flexibility when it comes to your installation configuration.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-REMOTE urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor (separate box to controls allowing greater flexibility of installation)

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-REMOTE-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 230v ac 50Hz 10VA maximum

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-REMOTE or AUFC-REMOTE-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-REMOTE timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Mains powered – fit & forget solution
  • Fail-safe valve – closes if power is removed or fails
  • No need to reset after power outage
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Remote (Autosave UFC-REMOTE) appeared first on Watersavers.

]]> Autosave Urinal Flush Control – Battery (Autosave UFC-B) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-battery-autosave-ufc-b/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-battery-autosave-ufc-b Fri, 20 Oct 2023 14:30:10 +0000 https://www.watersavers.co.uk/?post_type=product&p=28461
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Battery

4.5 V battery operated 15mm timed urinal flushing control with PIR sensor – the simplest and most convenient setup for exposed and concealed cistern urinals.

The post Autosave Urinal Flush Control – Battery (Autosave UFC-B) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Battery (Autosave UFC-B)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

The battery version is ideal for areas without readily available mains power supply, making the Autosave UFC-B the simplest configuration to fit to a washroom urinal cistern water supply.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-B urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-B-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 4.5 VDC (3 x AA batteries)

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-B or AUFC-B-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-M timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Battery powered – easy maintenance and easy access
  • Fail-safe valve – closes if power is removed or fails
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Battery (Autosave UFC-B) appeared first on Watersavers.

]]> Autosave Urinal Flush Control – Mains (Autosave UFC-M) https://www.watersavers.co.uk/shop/watersavers/autosave-urinal-flush-control-m/?utm_source=rss&utm_medium=rss&utm_campaign=autosave-urinal-flush-control-m Mon, 09 Oct 2023 07:53:00 +0000 https://www.watersavers.co.uk/?post_type=product&p=28414
Timed Urinal Flushing Control with PIR Sensor - Autosave Urinal Flush Control - Mains 

230v AC mains operated 15mm timed urinal flushing control with PIR sensor – the complete ‘fit & forget’ solution for exposed or concealed cisterns.

The post Autosave Urinal Flush Control – Mains (Autosave UFC-M) appeared first on Watersavers.

]]>

Autosave Urinal Flush Control – Mains (Autosave UFC-M)

Completely redeveloped for 2023

Watersavers were the designers of the very first water-saving, infrared urinal flush control back in the 80s. The latest Autosave Urinal Flush Control range represents a complete overhaul of the ever-popular Autosave urinal cistern flushing control units.

The addition of multiple cable entry points allows for versatile fitting options when installing, while the outer dimensions of the completely redesigned, low-profile enclosure are 30% smaller than previous.

Watersavers offers a range of sensor options to suit different locations and includes a comprehensive fitting kit. The Autosave UFC-M urinal flushing control saves water by flushing urinals and refilling the cistern only after use. The included remote infrared PIR sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle at a preset time following detection.

A simple pushbutton setup procedure sets the cistern fill time. A programmable switch enables the installer to choose the flushing frequency and to set a hygiene flush interval for periods when the building is unoccupied.

Specification

Detection (included): PIR sensor

Solenoid Valve (included): Brass normally closed, 15 mm compression fittings, 2.4 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low-pressure valve for tank fed installations – Product code AUFC-M-LP)

Alternative Valve Specifications: Please contact us sales@watersavers.co.uk or call 01603 720999

Cistern Fill Time: 1 to 34 minutes – set by simple pushbutton routine

Flush Program Options: Flush delay (time from detection to actual flush) 5 – 35 minutes in 5-minute increments, hygiene flush 12 or 24 hour

Test Function: Magi-Test Wand Device (optional extra), provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time

Power: 230v ac 50Hz 10VA maximum

Enclosure: Size 126 x 96 x 41mm (exc. cable glands) in white RAL 9010

Approvals: All valves used with Autosave products are WRAS approved

PRODUCT CODE: AUFC-M or AUFC-M-LP (Low-pressure valve version)

PIR Sensor

Watersavers’ Autosave UFC-M timed urinal flushing control has a built-in sensor that features a high sensitivity PIR detector with a range of 4 metres and an angle of > 100°. Please contact us if you have any special requirements.

  • Sensor high sensitivity 4m 100° range
  • Suitable for surface or flush mounting
  • Detection LED
  • White finish

Features

  • 6 – 12-month typical payback period
  • Save up to 80% on metered water bills
  • Guaranteed for three years
  • WRAS approved valve
  • Simple one button setup procedure
  • Programmable flush delay and 12 or 24hr hygiene flush
  • Magi-Test Wand can provide a functional check (optional extra)
  • Suitable for left-hand or right-hand water inlet
  • Mains powered – fit & forget solution
  • Fail-safe valve – closes if power is removed or fails
  • No need to reset after power outage
  • Manufactured in the UK

Optional Extra

Magi-Test Wand – Telescopic test wand for use with the autosave controls.

This product will typically be dispatched within 2-3 working days.

PLEASE GET IN TOUCH
PRODUCT SPECIFICATIONS

If you are looking for any of the following models-

  • Watersavers Autosave M01
  • Watersavers Autosave M02
  • Watersavers Autosave B01
  • Watersavers Autosave B02

These legacy products are now all obsolete, however we do still hold some limited spares for older generation urinal flush controls. If you have one that is in need of repair please contact info@watersavers.co.uk to see if we can help.

Click here to see our brand new Autosave range which supersedes these models.

The post Autosave Urinal Flush Control – Mains (Autosave UFC-M) appeared first on Watersavers.

]]> Sounder Beacon https://www.watersavers.co.uk/shop/watersavers/sounder-beacon-sb-100/?utm_source=rss&utm_medium=rss&utm_campaign=sounder-beacon-sb-100 Wed, 25 Jan 2023 14:39:55 +0000 https://www.watersavers.co.uk/?post_type=product&p=28148 Sounder Beacon – SB-100

The sounder beacon is a visual strobe light alarm that works in conjunction with the leak detection range.

The post Sounder Beacon appeared first on Watersavers.

]]>

Product Specification for Sounder Beacon- SB-100

The sounder beacon is a visual strobe-light alarm that works in conjunction with the leak detection range.

The unit has the option of independent or combined operation and is manufactured in a flame retardant polymer with a red lens which is highly effective at attracting attention.

Features

  • EN54 – 3 pending approval CPD, LPC & VdS
  • Ultra-low current consumption
  • 32 user selectable tones
  • Choice of three volume levels
  • Rated IP66 or IP45
  • Installation via side & rear cable entry
  • Easy push & twist lockable bayonet mounting
  • Temperature range from –20 to +70°C
  • Simple in and out wiring blocks
  • Full range of accessories available

Units meet minimum requirements of IP21C shallow base and IP33C deep base in accordance with EN54-3

Works with our Major Water Leak Detection Systems.

Product Code: SB-100

This product will typically be dispatched within 2-3 working days.

PRODUCT SPECIFICATIONS

The post Sounder Beacon appeared first on Watersavers.

]]> Wall-Mounting Brackets https://www.watersavers.co.uk/shop/watersavers/wall-mounting-brackets-wmb-100/?utm_source=rss&utm_medium=rss&utm_campaign=wall-mounting-brackets-wmb-100 Wed, 25 Jan 2023 14:32:29 +0000 https://www.watersavers.co.uk/?post_type=product&p=28144 Wall-Mounting Brackets

Steel bracket kit to wall mount leak detection panel. Helps to speed up installation and are easy to fix.

The post Wall-Mounting Brackets appeared first on Watersavers.

]]>

Steel bracket kit to wall mount leak detection panel. Helps to speed up installation and are easy to fix.

This product will typically be dispatched within 2-3 working days.

The post Wall-Mounting Brackets appeared first on Watersavers.

]]>