Solenoid Shut Off Water Valves (Electric Water Valve)

These 230/240v AC solenoid shut off valves enable a water supply to be turned on or off in response to an electrical signal. Our standard valves are Normally Closed – which means that they are closed when de-energised (fail safe) and open when energised.

Watersavers Smart Valve Monitor (SVM) range of WRAS approved, Normally Closed (power to open), pilot operated, brass solenoid shut off valves, controlled by an on/off switch, a time switch or by a PIR sensor switch for BREEAM credits.

Please read instructions carefully before installation, we recommend the fitting of a gauze strainer to the inlet to prevent ingress of debris into the valve.

Specification

• 2/2 NC Normally Closed (fail safe) operation
• Available in sizes from ½” to 2″ BSP female thread
• Minimum pressure 0.35 Bar.  Maximum pressure 13 Bar (½” – 1″) 10 Bar (1¼” – 2″)
• Maximum temperature 90°C
• WRAS approved
• 230/240v coil – other AC & DC coil voltage options available

Product Codes

• ½” SVM-15 | 1¼” SVM-35
• ¾” SVM-22 | 1½” SVM-42
• 1″ SVM-28 | 2″ SVM-50

Please note – standard coil voltage is 230/240v AC.

Add alternative coil voltage to product code if required (e.g. SVM-22-24VAC or SVM-15-12VDC).