
Autosave B01
Urinal Flushing Control with Built-in PIR Sensor
Autosave B01 urinal flushing control with built-in PIR sensor – for exposed cisterns above urinal bowls. 6v DC battery operated, ideal for installations where a 230v AC supply is not readily available.
One of our most popular battery powered urinal flush control with a reputation for reliability and outstanding service. A 3-year average battery life (batteries provided) and quick pay back makes this flush control a popular choice.
What does it do? The Autosave B01 urinal flushing control saves water by flushing urinals only after use. A sensitive built-in infrared PIR (passive infrared) sensor detects individuals in the washroom area and initiates a cistern fill and flush cycle a preset time later. A programable 12 or 24-hour hygiene flush is initiated when the urinals are unused such as during the night or at weekends. This automatic flushing control is easily fitted and commissioned by a suitably qualified person.
Specification
Detection: By built-in passive infrared sensor, range approximately 4 m, coverage 100° from perpendicular
Solenoid valve: Brass latching, 15 mm compression fittings, 2 mm orifice, pressure range 0 – 12 Bar with mesh filter (optional low pressure for tank fed installations)
Other valve specifications: Please contact us sales@watersavers.co.uk or call 01603 720999
Batteries: Four Duracell AA cells (supplied – average life 3-years). No need to reset when changing batteries
Low battery warning: Led flashes to indicate low battery status. Valve closes (fail safe) two weeks following warning
Cistern fill time: 1 to 34 minutes – set by simple pushbutton routine
Flush program options: Flush delay (time from detection to actual flush) 5 – 35 mins in 5 min increments, hygiene flush 12 or 24 hour
Test function: Magi-test wand, provides instant full functional test including valve, infrared PIR sensor operation, battery status, water supply and cistern fill time
Enclosure: Size 135 x 75 x 75 mm (exc. valve) in white RAL 9010 PVC
Approvals: All autosave products are WRAS approved and are featured on the Government’s ECA Technology List
PRODUCT CODE: Autosave-B01 & Autosave-B01-LP (optional low-pressure valve)
Features
- 6–12-month typical payback period
- Save up to 80% on metered water bills
- Guaranteed for three years
- ECA listed
- WRAS approved valve
- Integral solenoid valve and PIR sensor
- Simple one button setup procedure
- Programmable flush delay and 12 or 24hr hygiene flush
- Magi-Test wand provides functional check
- Suitable for left-hand or right-hand water inlet
- Fitting kit includes four alkaline batteries, isolating valve, fixing screws and installation instructions
- Manufactured in the UK